Package cern.colt.map

Class OpenLongObjectHashMap<T>

  • All Implemented Interfaces:
    Serializable, Cloneable
    public class OpenLongObjectHashMap<T>
extends AbstractLongObjectMap<T>
    Hash map holding (key,value) associations of type (long-->Object); Automatically grows and shrinks as needed; Implemented using open addressing with double hashing. First see the package summary and javadoc tree view to get the broad picture. Overrides many methods for performance reasons only.
    Version:
    1.0, 09/24/99
    Author:
    wolfgang.hoschek@cern.ch
    See Also:
    HashMap, Serialized Form

    • Field Detail

      • table

        protected long[] table
        The hash table keys.

      • values

        protected T[] values
        The hash table values.

      • state

        protected byte[] state
        The state of each hash table entry (FREE, FULL, REMOVED).

      • freeEntries

        protected int freeEntries
        The number of table entries in state==FREE.

    • Constructor Detail

      • OpenLongObjectHashMap

        public OpenLongObjectHashMap()
        Constructs an empty map with default capacity and default load factors.

      • OpenLongObjectHashMap

        public OpenLongObjectHashMap​(int initialCapacity)
        Constructs an empty map with the specified initial capacity and default load factors.
        Parameters:
        initialCapacity - the initial capacity of the map.
        Throws:
        IllegalArgumentException - if the initial capacity is less than zero.

      • OpenLongObjectHashMap

        public OpenLongObjectHashMap​(int initialCapacity,
                             double minLoadFactor,
                             double maxLoadFactor)
        Constructs an empty map with the specified initial capacity and the specified minimum and maximum load factor.
        Parameters:
        initialCapacity - the initial capacity.
        minLoadFactor - the minimum load factor.
        maxLoadFactor - the maximum load factor.
        Throws:
        IllegalArgumentException - if initialCapacity < 0 || (minLoadFactor < 0.0 || minLoadFactor >= 1.0) || (maxLoadFactor <= 0.0 || maxLoadFactor >= 1.0) || (minLoadFactor >= maxLoadFactor) .

    • Method Detail

      • clear

        public void clear()
        Removes all (key,value) associations from the receiver. Implicitly calls trimToSize().
        Specified by:
        clear in class AbstractMap

      • clone

        public Object clone()
        Returns a deep copy of the receiver.
        Overrides:
        clone in class PersistentObject
        Returns:
        a deep copy of the receiver.

      • containsKey

        public boolean containsKey​(long key)
        Returns true if the receiver contains the specified key.
        Overrides:
        containsKey in class AbstractLongObjectMap<T>
        Returns:
        true if the receiver contains the specified key.

      • containsValue

        public boolean containsValue​(T value)
        Returns true if the receiver contains the specified value.
        Overrides:
        containsValue in class AbstractLongObjectMap<T>
        Returns:
        true if the receiver contains the specified value.

      • ensureCapacity

        public void ensureCapacity​(int minCapacity)
        Ensures that the receiver can hold at least the specified number of associations without needing to allocate new internal memory. If necessary, allocates new internal memory and increases the capacity of the receiver.

        This method never need be called; it is for performance tuning only. Calling this method before put()ing a large number of associations boosts performance, because the receiver will grow only once instead of potentially many times and hash collisions get less probable.

        Overrides:
        ensureCapacity in class AbstractMap
        Parameters:
        minCapacity - the desired minimum capacity.

      • forEachKey

        public boolean forEachKey​(LongProcedure procedure)
        Applies a procedure to each key of the receiver, if any. Note: Iterates over the keys in no particular order. Subclasses can define a particular order, for example, "sorted by key". All methods which can be expressed in terms of this method (most methods can) must guarantee to use the same order defined by this method, even if it is no particular order. This is necessary so that, for example, methods keys and values will yield association pairs, not two uncorrelated lists.
        Specified by:
        forEachKey in class AbstractLongObjectMap<T>
        Parameters:
        procedure - the procedure to be applied. Stops iteration if the procedure returns false, otherwise continues.
        Returns:
        false if the procedure stopped before all keys where iterated over, true otherwise.

      • forEachPair

        public boolean forEachPair​(LongObjectProcedure<T> procedure)
        Applies a procedure to each (key,value) pair of the receiver, if any. Iteration order is guaranteed to be identical to the order used by method forEachKey(LongProcedure).
        Overrides:
        forEachPair in class AbstractLongObjectMap<T>
        Parameters:
        procedure - the procedure to be applied. Stops iteration if the procedure returns false, otherwise continues.
        Returns:
        false if the procedure stopped before all keys where iterated over, true otherwise.

      • get

        public T get​(long key)
        Returns the value associated with the specified key. It is often a good idea to first check with containsKey(long) whether the given key has a value associated or not, i.e. whether there exists an association for the given key or not.
        Specified by:
        get in class AbstractLongObjectMap<T>
        Parameters:
        key - the key to be searched for.
        Returns:
        the value associated with the specified key; null if no such key is present.

      • indexOfInsertion

        protected int indexOfInsertion​(long key)
        Parameters:
        key - the key to be added to the receiver.
        Returns:
        the index where the key would need to be inserted, if it is not already contained. Returns -index-1 if the key is already contained at slot index. Therefore, if the returned index < 0, then it is already contained at slot -index-1. If the returned index >= 0, then it is NOT already contained and should be inserted at slot index.

      • indexOfKey

        protected int indexOfKey​(long key)
        Parameters:
        key - the key to be searched in the receiver.
        Returns:
        the index where the key is contained in the receiver, returns -1 if the key was not found.

      • indexOfValue

        protected int indexOfValue​(T value)
        Parameters:
        value - the value to be searched in the receiver.
        Returns:
        the index where the value is contained in the receiver, returns -1 if the value was not found.

      • keyOf

        public long keyOf​(T value)
        Returns the first key the given value is associated with. It is often a good idea to first check with containsValue(Object) whether there exists an association from a key to this value. Search order is guaranteed to be identical to the order used by method forEachKey(LongProcedure).
        Overrides:
        keyOf in class AbstractLongObjectMap<T>
        Parameters:
        value - the value to search for.
        Returns:
        the first key for which holds get(key) == value; returns Long.MIN_VALUE if no such key exists.

      • keys

        public void keys​(LongArrayList list)
        Fills all keys contained in the receiver into the specified list. Fills the list, starting at index 0. After this call returns the specified list has a new size that equals this.size(). Iteration order is guaranteed to be identical to the order used by method forEachKey(LongProcedure).

        This method can be used to iterate over the keys of the receiver.

        Overrides:
        keys in class AbstractLongObjectMap<T>
        Parameters:
        list - the list to be filled, can have any size.

      • pairsMatching

        public void pairsMatching​(LongObjectProcedure condition,
                          LongArrayList keyList,
                          ObjectArrayList valueList)
        Fills all pairs satisfying a given condition into the specified lists. Fills into the lists, starting at index 0. After this call returns the specified lists both have a new size, the number of pairs satisfying the condition. Iteration order is guaranteed to be identical to the order used by method forEachKey(LongProcedure).

        Example: 

         LongObjectProcedure condition = new LongObjectProcedure() { // match even keys only
        public boolean apply(long key, Object value) { return key%2==0; }
 }
 keys = (8,7,6), values = (1,2,2) --> keyList = (6,8), valueList = (2,1)
        Overrides:
        pairsMatching in class AbstractLongObjectMap<T>
        Parameters:
        condition - the condition to be matched. Takes the current key as first and the current value as second argument.
        keyList - the list to be filled with keys, can have any size.
        valueList - the list to be filled with values, can have any size.

      • put

        public boolean put​(long key,
                   T value)
        Associates the given key with the given value. Replaces any old (key,someOtherValue) association, if existing.
        Specified by:
        put in class AbstractLongObjectMap<T>
        Parameters:
        key - the key the value shall be associated with.
        value - the value to be associated.
        Returns:
        true if the receiver did not already contain such a key; false if the receiver did already contain such a key - the new value has now replaced the formerly associated value.

      • rehash

        protected void rehash​(int newCapacity)
        Rehashes the contents of the receiver into a new table with a smaller or larger capacity. This method is called automatically when the number of keys in the receiver exceeds the high water mark or falls below the low water mark.

      • removeKey

        public boolean removeKey​(long key)
        Removes the given key with its associated element from the receiver, if present.
        Specified by:
        removeKey in class AbstractLongObjectMap<T>
        Parameters:
        key - the key to be removed from the receiver.
        Returns:
        true if the receiver contained the specified key, false otherwise.

      • setUp

        protected void setUp​(int initialCapacity,
                     double minLoadFactor,
                     double maxLoadFactor)
        Initializes the receiver.
        Overrides:
        setUp in class AbstractMap
        Parameters:
        initialCapacity - the initial capacity of the receiver.
        minLoadFactor - the minLoadFactor of the receiver.
        maxLoadFactor - the maxLoadFactor of the receiver.
        Throws:
        IllegalArgumentException - if initialCapacity < 0 || (minLoadFactor < 0.0 || minLoadFactor >= 1.0) || (maxLoadFactor <= 0.0 || maxLoadFactor >= 1.0) || (minLoadFactor >= maxLoadFactor) .

      • trimToSize

        public void trimToSize()
        Trims the capacity of the receiver to be the receiver's current size. Releases any superfluous internal memory. An application can use this operation to minimize the storage of the receiver.
        Overrides:
        trimToSize in class AbstractMap

      • values

        public void values​(ObjectArrayList list)
        Fills all values contained in the receiver into the specified list. Fills the list, starting at index 0. After this call returns the specified list has a new size that equals this.size(). Iteration order is guaranteed to be identical to the order used by method forEachKey(LongProcedure).

        This method can be used to iterate over the values of the receiver.

        Overrides:
        values in class AbstractLongObjectMap<T>
        Parameters:
        list - the list to be filled, can have any size.